NEWS: Description of software updates

Oct. 16, 2020 - Software release

  • Smarty and MM3 Agent: New release 1.0.6:
    Minor bug fixes.

Apr. 08, 2019 - Software release

  • Smarty Touch and MM3: New firmware 2.3.2:
    TPMS 2007.5 – 2009 is now programmable, New maximum for Boost pressure PID, TCM 2007.5 - 2009 can now be up/downgraded with the UDC Pro-RT Pro license and in the dashboard menu point you’ll now see the last settings programmed into the truck.

Dec. 10, 2018 - Software release

  • Smarty Touch and MM3: New firmware 2.3.1:
    MY 2013-2018 Features' bug fix.

Dec. 1, 2018 - Software release

  • Smarty Touch and MM3:
    Reverted to old firmware due to an issue we're currently investigating.

Nov. 30, 2018 - Software release

  • Smarty Touch and MM3: New firmware 2.3.0:
    Now the TCM can be tuned for the 6.7L CR trucks MY 2007.5 - 2009 and new programmable features, fog lights with highs on + one touch lane change, for the 6.7L CR trucks MY 2013 - to present are available.
  • Smarty UDC Pro RT: Ver. 1.0.0.0:
    Now the TCM can be personalized for the 6.7L CR trucks MY 2007.5 - 2009. This is possible by creating the UDC Pro RT Document manually over menu point "Stock file manual entry..." via Get File command into File menu.
  • Smarty and MM3 Agent: Ver. 1.0.1.0:
    now microSD will be recognized up to 32GB with FAT32 format.

Nov. 15, 2018 - Software release

  • Smarty Agent and MM3 Agent Ver. 1.0.0.0:
    These softwares will help you out to keep up to date Touch & MM3 firmwares and tuning data + the UDC Pro RT software on your PC. Install the one you need and check for updates. In case of a new Touch/MM3 Firmware and Tuning Data you'll need to insert your device SD card into the computer, in order to update it.

Aug. 27, 2018 - Software release

  • Smarty Touch and MM3: New firmware 2.2.13:
    Now you can choose between BASIC or ADVANCED (the same as before) ECM tuning. BASIC will just tune your ECM with a base software without any request of the adjustable parameters. You can then choose, via SWITCH feature, to increase the power if needed. BASIC programming will disable all ADVANCED features like: RT programming, Data Log and High speed Data Log, PoD, etc. In order to enable them again you'll need to tune the truck with ADVANCED ECM programming. 48RE PIDs for MY 2003-2005.5 are now enabled.

Jul. 11, 2018 - Software release

  • Smarty Touch:
    Cruise control max road speed set to 250 mph for all MY and non-responsive pedal fix for 6.7L CR trucks MY 2013 - 2018.

Jul. 09, 2018 - Software release

  • Smarty Touch and MM3: New firmware 2.2.9:
    Now the TPMS can be configured for the 6.7L CR trucks MY 2018. MY 2007.5 - 2009 coming soon.

Jun. 22, 2018 - Software release

  • Smarty Touch and MM3: New firmware 2.2.4:
    Now the TPMS can be configured for the 6.7L CR trucks MY 2010 - 2017. MY 2018 coming soon.

May 25, 2018 - Software release

  • Smarty Touch and MM3: New firmware 2.2.2:
    Added switch selection menu in dashboard menu. Switch position 0 is needed in case you'd like to use the RT parameters, disabling the Switch tuning.

May 21, 2018 - Software release

  • Smarty Touch and MM3: New firmware 2.2.1:
    Switch able tuning for all trucks starting from 5.9L CR MY 2006 to present, minor bug fixes and improved device's performance.
  • Smarty UDC Pro RT:
    Switch parameters: Duration and Timing are now customizable for all trucks starting from 5.9L CR MY 2006 to present. Added Torque rate limiting parameters for all 6.7L CR trucks MY 2010 - 2012.

Jan. 23, 2018 - Software release

  • Smarty Touch and MM3: New firmware 2.1.25:
    you can now clear the 2018's DTCs and set the 2018's tire size. You'll need to tune the truck with the data (DRST007C) available in the update. MM3 Customers will need to recreate the ECM file with the latest Smarty UDC Pro release .40. Minor bug fixes.
  • Smarty UDC Pro RT:
    New 2018 tuning base in order to clear the 2018's DTCs and set the 2018's tire size. You'll need to recreate the ECM file with this release and tune the truck.

Dec. 27, 2017 - Software release

  • Smarty UDC Pro RT:
    Incorrect VIN # from USB bug fixed.

Dec. 18, 2017 - Software release

  • Smarty Touch and MM3: New firmware 2.1.20:
    MY 2018 released and minor bug fixes.
  • Smarty UDC Pro RT:
    MY 2018 released and minor bug fixes.

Oct. 10, 2017 - Software release

  • Smarty Touch and MM3:
    All ECM tuning parameters are now RT (except for 5.9L CR trucks MY 2003 - 2004), improved dashboard performance, HSDL is now selectable in the dashboards point too and increased to 100 PSI the boost pressure max value.
  • Smarty UDC Pro RT:
    Increased RT parameters for all truck generations (except for 5.9L CR trucks MY 2003 - 2004). In order to be able to use them you need to create a new ECM file with this release for your truck.

Sep. 19, 2017 - Software release

Sep. 14, 2017 - Software release

  • Smarty Touch and MM3:
    2010+ trucks Boost pressure estimate parameters set to off, addressed DTC P0106 and improved error messages for RT parameters.
  • Smarty UDC Pro RT:
    2010+ trucks Boost pressure estimate parameters set to off and addressed DTC P0106 and minor bug fixes.

Aug. 30, 2017 - Software release

  • Smarty UDC Pro RT:
    Export of modificated X or Y Axis in transmission tuning parameters bug fixed.

Aug. 29, 2017 - Software release

  • Smarty UDC Pro RT:
    2010+ trucks new parameters: Boost Pressure Sensor Diagnostic Threshold and OSS speed needs to be above this to apply the Hign & Low/Reverse element. To update your UDC Pro RT Software: download this file 20170829UP.7z, uncompress the files in a folder, Start the Tuning Software, Close all documents, Tools > Update 'Tunes Library' from disk... and then Select the folder that contains the files extracted before. Min. requirements Version .32!

Aug. 23, 2017 - Software release

  • Smarty Touch and MM3:
    2013+ trucks Speed limiter bug fix and addressed DTC P0113, U0100, U010C & U010E for 2012+ trucks.
  • Smarty UDC Pro RT:
    2013+ trucks Speed limiter bug fix and minor bug fixes.

Jul. 28, 2017 - Software release

  • Smarty UDC Pro RT:
    Revised and improved 68RFE tuning parameters and minor bug fixes.

Jul. 07, 2017 - Software release

  • Smarty Touch and MM3: NEW firmware 2.0.0:
    NEW GUI and minor bug fixes.

May 17, 2017 - Software release

  • Smarty UDC Pro RT:
    Minor bug fixes, Demo files bug fixed, Change max value for Boost pressure sensor linearization curve for all 6.7L trucks and added Boost pressure sensor linearization curve for all 5.9L trucks.

Apr. 18, 2017 - Software release

  • Smarty Touch and MM3: NEW firmware 1.3.9:
    improved error messages and minor bug fixes.

Mar. 08, 2017 - Software release

  • Smarty Touch and MM3: NEW firmware 1.3.8:
    improved the calibration compatibility search, improved firmware update routine, Data logs file will now be saved in following folders: Dashboard log under /log_dash and ECM High speed Data Logger under /log_hspd on the SD card and tuning data updated to latest Chrysler's releases for 2013+ trucks.
  • Smarty UDC Pro RT:
    High Speed Log Viewer is released, the Log Viewer will read all Log sessions created over the ECM High speed Data Logger on your Touch or MM3 device (saved under /log_hspd on the SD card) ; and tuning data updated to latest Chrysler's releases for 2013+ trucks.

Feb. 16, 2017 - Software release

  • Smarty Touch and MM3: NEW firmware 1.3.6:
    2003 - 2005.5 trucks with Data Logger feature and minor bug fixes.
  • Smarty UDC Pro RT:
    2003 - 2005.5 trucks with Data Logger feature, 2007.5 - 2009 trucks RPM bug fix and Professional licenses tools bug fixes.

Feb. 06, 2017 - Software release

  • Smarty Touch and MM3: NEW firmware 1.3.5:
    Added ECM and Device S/N in UDC informations and minor bug fixes. ECM and RTP/RTG files MUST be created with Smarty UDC Pro RT release: 0.0.0.26. Truck compatibility search bug fix.
  • Smarty UDC Pro RT:
    Copy&Paste from mouse bug fix, Added ECM and Device S/N handling, DTC bug fixed and improved security for UDC Pro RT Professional licenses.

Jan. 23, 2017 - Software release

  • Smarty Touch and MM3: NEW firmware 1.3.0:
    Added UDC Pro RT Professional licenses functionalities and minor bug fixes. In case the device is VIN locked and the truck was programmed by someone else you don't need anymore a recovery but you just need to return stock your truck.
  • Smarty UDC Pro RT:
    Added the Smoothing functionality and the UDC Pro RT Professional licenses.

Dec. 15, 2016 - Software release

  • Smarty Touch and MM3: NEW firmware 1.2.3:
    Added bookmark feature in Data Logger and Calibration signature (Tuning Description Parameter in UDC Pro) and improved the Data Logger for 2006 - 2007 5.9L and 2007.5 - 2009 6.7L trucks. The Calibration signature is available under the "SMARTY Touch Info" and will show you, after you tune the ECM with these data, which parameters were selected or the string written in the "Tuning Description" parameter available in UDC Pro RT software. (Feature available for all trucks from 2006)
  • Smarty UDC Pro RT:
    Improved the Data Logger for 2006 - 2007 5.9L and 2007.5 - 2009 trucks.

Nov. 28, 2016 - Software release

  • Smarty Touch and MM3:
    6.7L Pickup and C&C 2017 trucks released.

Nov. 23, 2016 -Software release

  • Smarty Touch and MM3: NEW firmware 1.2.1:
    that solves issue error 12601 after 6.7L 2007.5 - 2009 trucks programming & NEW transmission tuning for 6.7L 2010+ trucks

Nov. 22, 2016 - Software release

  • Smarty Touch and MM3: NEW firmware 1.2.0:
    with Data Logger feature for all CAN (2006+) trucks released, UDC Pro RT files for VP trucks are now selectable and minor bug fixes & NEW tuning parameters (VGT, Rail pressure, etc.) for 6.7L 2013+ trucks.
  • Smarty UDC Pro RT:
    NEW parameters for 6.7L 2010+ trucks and Data Logger feature.

Oct. 06, 2016 - Software release

  • Smarty Touch: New firmware 1.1.9:
    that solves a GUI error when choosing Smarty RT Defined Parameters.
  • Smarty UDC Pro RT:
    Added Air Filter parameters for 2013+ trucks and revised 68RFE parameters.

Oct. 05, 2016 - Software release

  • Smarty UDC Pro RT:
    Revised 68RFE parameters for 2010+ and added RPM limiter for 2007.5 - 2009 trucks
  • Smarty Touch:
    For 2010+ 68RFE trucks: New transmission tuning level for aftermarket transmission and now you can tune the transmission with half power level.

Aug. 08, 2016 - Software release

  • Smarty UDC Pro RT:
    Now you create a new document from an existing one by changing the VIN # stored, new FAN parameter list for 6.7L from 2010+, revised max parameter values for 5.9L 2003 to 2007 and minor bug fixes.

June 28, 2016 - Software release

  • MM3 and Smarty Touch:
    Update bug fixed and minor improvements.

June 09, 2016 - Software release

  • Smarty UDC Pro RT:
    Added 5.9L VP and 6.7L from 2007.5 to 2009 and revised 5.9L CR and 6.7L from 2010 - 2012 parameters.
  • MM3 and Smarty Touch:
    Added UDC Pro RT for 5.9L VP and 6.7L from 2007.5 to 2009, corrected Transmission Temp PIDs for 6.7L 2010+, startup improvement and minor bug fixes.

May 11, 2016 - Software release

  • Smarty UDC Pro RT:
    Revised 5.9L CR parameters.

May 06, 2016 - Software release

  • Smarty UDC Pro RT:
    Corrected base file bug for 2015 C&C 4500/5500 and 2015 Pickup Manual trucks.

May 04, 2016 - Software release

  • Smarty UDC Pro RT:
    5.9L Common Rail trucks are now supported and minor bug fixes.
  • MM3 and Smarty Touch:
    UDC Pro RT for 5.9L Common Rail trucks features are now supported.

Apr. 14, 2016 - Software release

  • Smarty UDC Pro RT:
    Minor bug fixes and improved the installation process.

Mar. 31, 2016 - Software release

  • Smarty UDC Pro RT:
    Minor bug fixes.

Mar. 29, 2016 - Software release

Mar. 25, 2016 - Software release

  • Smarty UDC Pro RT:
    Minor bug fixes.

Mar. 24, 2016 - Software release

  • Smarty UDC Pro RT:
    Minor bug fixes.

Mar. 14, 2016 - Software release

  • Smarty Touch and Smarty UDC Pro RT:
    New VIN # lock policy: For more informations click here!, micro USB port is now enabled for UDC Pro RT communications, Real time programming at every key on bug fixed and Comparison and copy between two UDC Pro RT documents

Mar. 07, 2016 - Software release

  • Smarty Touch:
    Improved Smarty Touch firmware: you should see fewer crashes, New tuning parameters for MY 2010+ trucks (Added 2011 and 2012 C&C trucks too)

Mar. 02, 2016 - Software release

  • Smarty UDC Pro RT:
    In case of maps comparison only the differences are shown if the setting "Show comparative 1D" is ON, New export interface for *.ECM, *.RTP and *.RTG files, New parameters configuration and new DEMOs and Minor bug fixes

Feb. 25, 2016 - Software release

  • Smarty UDC Pro RT:
    We like your feedback and are always working to improve the new UDC Pro RT software. Overall you should see fewer crashes by general bug fixes, performance improvements and a more stable experience.

Feb. 24, 2016 - Software release

  • Smarty UDC Pro RT:
    Added new tuning parameters and Minor bug fixes

Feb. 17, 2016 - Software release

  • Another milestone: the new UDC Pro RT, tuning platform for the Smarty Touch, for Dodge RAM MY 2010 - 2016 Pickup and C&C released. For more informations click here!

Dec. 04, 2015 - Software update

  • Smarty Touch:
    A milestone: FREE complete 68RFE transmission tuning!
    Complete means:
    1. Raised line pressure in all Fwd gears AND during the shifts.
    2. Increased shift firmness for less slip in the clutches.
    3. Changed shift points at WOT in all gears @ 3000 RPM.
    4. 6th gear unlock and downshift to avoid the massive torque and make the transmission last longer.
    In addition to the transmission tuning a few other things are changing also:
    1. Revised timing for less combustion noise.
    2. Revised rail pressure. The actual rail pressure follows now more precisely the desired rail pressure. This becomes most noticeable under WOT and / or with aftermarket injectors.
    3. Several DTC codes have been addressed.
    4. A few things have changed in the Touch's menus.
    5. For customer care: a new firmware which now writes a .txt file onto the SD card with all the information's about:
      1. Tuning settings
      2. OTF settings
      3. Firmware version
      4. Tuning software version
      5. Bat voltage and the like.
      Read that file from the SD card and send it to us. It will help us tremendously helping you, our valued customers!

Nov. 26, 2015 - Software update

  • Smarty Touch:
    Addressed engine missing at WOT issue for MY 2013 - 2016.

Nov. 09, 2015 - Software update

  • Smarty Touch:
    Improved On the fly checks for MY 2010 - 2012 and Addressed Transmission tuning issue for MY 2015

Oct. 27, 2015 - Software update

  • Smarty Touch:
    MY 2016 PickUp and C&C are now supported and MY 2013 to 2015 PickUp and C&C:
    1. Improved compatibility for new Chrysler updates
    2. Addressed idle shutdown
    3. Revised VGT settings
    4. Addressed several DTCs like P026*
    5. Revised Duration texts for MY 2010+
    6. Addressed On the fly issues with MY 2010 - 2012

Oct. 13, 2015 - Software update

  • Smarty Touch:
    On the fly tuning software for MY 2010 - 2012 released. Now the adjustable parameters are: Duration, Rail pressure, Timing, Torque, Transmission and Variable geometry turbo.

Sep. 02, 2015 - Software update

  • Smarty Touch:
    improved truck's battery consumption.

Aug. 31, 2015 - Software update

May 06, 2015 - Software update

Apr. 13, 2015 - Software update

  • Smarty Touch:
    improved recovery process for all trucks MY.

Feb. 17, 2015 - Software update

  • Smarty Touch:
    Addressed pressures PID's max value and minor bug fixes.

Jan. 08, 2015 - Software update

  • Smarty Touch:
    Improved MY 2003 with a wrong VIN # management and minor bug fixes.

Dec. 23, 2014 - Software update

Dec. 17, 2014 - Software update

Dec. 03, 2014 - Software update

  • Smarty Touch:
    Added new PCM PID's for MY 1998.5 to 2004 and minor bug fixes.

Nov. 13, 2014 - Software update

  • Smarty Touch:
    Addressed Timing SAE PID's value for MY 2010 to 2012 and minor bug fixes.

Nov. 05, 2014 - Software update

Oct. 22, 2014

July 29, 2014 - Software update

  • Smarty S67 and Smarty JR67 (non US and US):
    improved internal compatibility handling for new Chrysler updates

Sep. 09, 2013 - Software update

  • Smarty S67 (non US and US):
    improved Speed Limiter option for MY 2007, 2008 and 2009

July 24, 2013 - Software update

  • Smarty S67 and Smarty JR67:
    improved compatibility and mileage for MY 2007, 2008 and 2009
  • Smarty UDC:
    Software update, For more informations click here!
  • Smarty S67 and Smarty JR67 (non US and US):
    improved overall power, larger power band, smoother power, stronger exhaust brake, better mileage and overall driveability for MY 2010, 2011, 2011.5 and 2012

July 23, 2013 - Software update

  • Smarty S67US and Smarty JR67US:
    improved compatibility and mileage for MY 2007, 2008 and 2009

Jun. 13, 2013 - Software update

Apr. 30, 2013 - Software update

Apr. 18, 2013 - Software update

Apr. 08, 2013 - Software update

  • Smarty S67US and Smarty JR67US:
    the US software is now available!

Feb. 28, 2013 - Announcement

Feb. 26, 2013 - Software update

Feb. 13, 2013 - Software update

  • Smarty S67 and Smarty JR67:
    improved internal compatibility handling for MY 2007, 2008 and 2009

Feb. 12, 2013 - Software update

  • Smarty S67 and Smarty JR67:
    improved compatibility for MY 2010 and internal compatibility handling

Dec. 24, 2012 - Software update

  • Smarty S67 and Smarty JR67:
    improved compatibility for MY 2011 and 2011.5

Dec. 12, 2012 - Software update

  • Smarty S04 and Smarty S04 TNT-R:
    addressed Smarty version update

Nov. 29, 2012 - Software update

  • Smarty S67 and Smarty JR67:
    improved compatibility for MY 2012

Nov. 09, 2012 - Software update

Oct. 05, 2012 - Software update

  • Smarty S04, Smarty S04 TNT-R, Smarty S06-PoD, Smarty S06-PoD TNT-R, Smarty JR and Smarty SSR:
    addressed DTC P2127

Oct. 02, 2012 - Software update

  • Smarty S67 and Smarty JR67:
    addressed DTC P0601

Sep. 14, 2012 - Software update

  • Smarty UDC:
    Software update and technical guides

Jul. 09, 2012 - Software update

  • Smarty S67 and Smarty JR67:
    Improved compatibility

Jun. 11, 2012 - Software release

  • Software UDC:
    available for download

May 30, 2012 - Software update

  • Smarty JR67:
    1. MY 2012 trucks are now supported!!!
    2. MY 2010 and above trucks: new tuning software
  • Smarty S67:
    The Smarty S67 for MY 2010 and above trucks is now available!!! For more informations click here!

May 18, 2012 - Software update

  • Smarty S06-PoD, Smarty JR and Smarty SSR:
    All 5.9L tuning softwares have been totally revised! Starting from this version all 5.9L softwares are now UDC capable. For more informations click here!

Apr. 10, 2012 - Software update

  • Smarty S06:
    a Smarty S06 will be converted to a Smarty S06-PoD (free of charge) with the latest software version

Feb. 19, 2012 - Software update

  • Smarty JR:
    New software update (CAN error # 152 solved)
    We apologize for the inconvenience!

Feb. 16, 2012 - Software update

  • Smarty S04, Smarty S06, Smarty S06-PoD, Smarty JR, Smarty SSR, Smarty S04 TNT-R, Smarty S06 TNT-R, Smarty S06-PoD TNT-R:
    Error solved when returning back to stock 2003 / 2003.5 CARB trucks only

Jan. 31, 2012 - Software release

  • Smarty UDC:
    Demo Software available for download

Jan. 25, 2012 - Software update

  • Smarty JR67:
    improved compatibility and NOW HO supported (2011.5)

Nov. 1, 2011 - Site restyle

Oct. 31, 2011 - Software update

  • Smarty SSR:
    New software

Oct. 20, 2011 - Software update

  • Smarty S04, Smarty S06 and Smarty S06-PoD:
    New software (above 210 hp)
  • Smarty S04TNT-R, Smarty S06TNT-R and Smarty S06-PoD TNT-R:
    New software (above 260 hp)

Sep. 09, 2011 - Software update

  • Smarty JR67:
    are now compatible with 2011 trucks, HO not yet supported

Aug. 30, 2011 - Software update

  • Smarty S04, Smarty S06, Smarty S06-PoD, Smarty JR:
    High idle enabled

Aug. 8, 2011 - Software update

  • Smarty S04, Smarty S06, Smarty S06-PoD, Smarty JR:
    Improved compatibility

Jul. 29, 2011 - Software update

  • Smarty S67 and Smarty JR67:
    Faster truck programming and Improved DTC management

Jul. 13, 2011 - Software update

  • Smarty S06 and Smarty S06-PoD:
    Shift Limiter parameter enabled in TNT software

Jul. 11, 2011 - Software update

  • Smarty S06, Smarty S06-PoD and Smarty JR:
    Improved DTC management

Jun. 10, 2011 - Software update

  • Smarty S04:
    improved compatibility

May 31, 2011 - Software update

  • Smarty SSR:
    Improved performance

Apr. 8, 2011 - Product release

  • The new Smarty Super Sport Revo is now available!!!

Mar. 15, 2011 - Software update

  • Smarty JR67:
    improved compatibility for 2010 trucks
  • Smarty S06-PoD, Smarty S06 and Smarty JR:
    improved compatibility

Feb. 10, 2011 - Software update

  • Smarty JR67:
    compatibility to 2010 trucks

Jul. 22, 2010 - Software update

  • Smarty S06, Smarty S06-PoD, Smarty JR:
    high idle enabled also in 2006 and 2007 trucks

Jul. 21, 2010 - Software update

  • Smarty S67 and Smarty JR67:
    improved compatibility

Jul. 13, 2010 - Software update

  • Smarty S04, Smarty S06, Smarty S06-PoD, Smarty JR:
    improved compatibility

Jun. 10, 2010 - Software update

  • Smarty S67 and Smarty JR67:
    improved compatibility

Apr. 26, 2010 - Software update

  • Smarty S67 and Smarty JR67:
    improved compatibility

Mar. 23, 2010 - Software update

  • Smarty S67 and Smarty JR67:
    now compatible to Cab&Chassis 2009

Mar. 19, 2010 - Software update

  • Smarty S06, Smarty S06-PoD and Smarty JR:
    high idle enabled in all models

Mar. 15, 2010 - Software update

  • Smarty S06, Smarty S06-PoD and Smarty JR:
    improved compatibility

Mar. 11, 2010 - Software update

  • Smarty JR67:
    are now compatible to 2009 trucks also built after march 2009!!!

Mar. 8, 2010 - Software update

  • Smarty S67:
    are now compatible to 2009 trucks also built after march 2009!!!

Feb. 23, 2010 - Software update

  • Smarty S67 and Smarty JR67:
    improved compatibility

Feb. 15, 2010 - Software update

  • Smarty S06, Smarty S06-PoD and Smarty JR:
    high idle enabled in all models

Feb. 11, 2010 - Software update

  • Smarty S06, Smarty S06-PoD and Smarty JR:
    New software update:
    1. compatibility to new 2006 editions
    2. improved timing in all models

Jan. 19, 2010 - Software update

  • Smarty S67 and Smarty JR67:
    Improved drivability

Dec. 9, 2009 - Software update

  • Smarty S67:
    Power on Demand is now available !!!

Nov. 6, 2009 - Software update

  • Smarty S67:
    Improved compatibility

Oct. 26, 2009 - Software update

  • Smarty S67:
    New software update

Oct. 5, 2009 - Software update

  • Smarty S67:
    improved compatibility

Sep. 16, 2009 - Software update

  • Smarty S03:
    corrected communication problem in a few truck models

Sep. 10, 2009 - Software update

  • Smarty S67:
    New software update

Sep. 1, 2009 - Software update

  • Smarty S06 and Smarty JR:
    Solved compatibility problem

Jul. 13, 2009 - Software update

  • Smarty S67:
    The main goal of this new revised version is to do away with excessive smoke!
    Up to CaTCHER # 7 there is now virtually NO SMOKE. At 130 additional hp we're
    hitting the efficiency limit of the turbo. Thus, CaTCHER # 8 & # 9 still do smoke some
    but at WOT ONLY and the smoke compared to R12 is reduced by at least 90%.
    "Almost" smoke free...
    1. SW's # 8 and # 9 are now 200 hp above stock.
    2. EGT are reduced.
    3. It is now possible for the customer to dial in the VGT responsiveness (In the revo options)
    The VGT levels are as follows:
    1. stock (makes for a somewhat sluggish throttle)
    2. The Default one, good compromise between responsiveness and MPG
    3. For Mileage! Less responsive than 2 but better for mileage (Should be used for towing heavy)
    4. As responsive as possible without creating too much back pressure.
      Mileage will suffer a little with this one!
    Smarty does now recognize the 2009 ECM's with the "lock out" boot loader.
    In that case Smarty will display "ECM Protected " and refuse to download to the truck.

Jun. 8, 2009 - Software update

  • Smarty S67:
    performance improvement

Apr.12, 2009 - Software update

  • Smarty S67:
    Correction for ABS programming (tire size adjustment)

Apr. 9, 2009 - Software update

  • Smarty JR:
    Correction in the torque management
  • Smarty S06-POD:
    Corrections in the power levels for TNT software

Apr. 7, 2009 - Product release

  • Smarty S67:
    The new Smarty for 6.7L trucks is now available!!!

Jan. 23, 2009 - Software update

  • Smarty JR:
    Power on Demand is now available!!!

Jan. 8, 2009 - Software update

  • Smarty S03:
    improved software compatibility

Nov. 17, 2008 - Product release

  • Smarty S06 PoD:
    The new Smarty S06 PoD (Power on Demand)

Nov. 14, 2008 - Software update

  • Smarty S06 and Smarty JR:
    Compatibility to new Chrysler software edition

Oct. 20, 2008 - Software update

  • Smarty JR:
    The REVO software is now available!!!

Aug. 19, 2008 - Software update

  • Smarty S03:
    The REVO software is now available !!!

May 8, 2008 - Software update

  • Smarty S04 and Smarty S06:
    The REVO-TNT software is now available (up to 230 hp added !!!)
    This software has been written for trucks with extensive modifications only!!!

May 6, 2008 - Software update

  • Smarty S04 and Smarty S06:
    The REVO software is now available!!!

Dec. 13, 2007 - Software update

  • Smarty S04, Smarty S06 and Smarty JR:
    This software release fixes the missing shift indicator lights in the 2003 AT trucks that was caused with the Dec. 5 release.
    Important: If you do not own a -2003 Automatic Transmission truck-, you do not need to update your Smarty! Nothing has changed for you.

Dec. 5, 2007 - Software update

  • Smarty S04 and Smarty S06:
    Totally revised softwares!
    With the eleventh software version the long awaited “low smoke” software version becomes finally available to you. ONE YEAR of R&D...
    These are the softwares that have been mass tested as the “ beta 4.x ”.
    Greatly reduced smoke.
    Greatly reduced EGT.
    Better Mileage with the same power as the previous software versions.
    In short what has changed:
    1. Revised injection timing, revised fuel injection duration tables, revised boost tables.
    2. Revised low end torque management. 95% of these softwares is revised /new.
    3. NONE of these softwares add any rail pressure above the factory stock settings.

Oct. 16, 2007 - Software update

  • Smarty S-04 and Smarty S-06:
    New updates available

Oct. 5, 2007 - Software update

  • Smarty S-04 and Smarty S-06:
    Programmable Speed Limiter!!!

Sep. 20, 2007 - Software update

  • Smarty S-03:
    Programmable Speed Limiter!!!

Aug. 20, 2007 - Software update

  • Smarty S-03:
    improved reliability of the programming operation with several checks during the data transmission.

Jul. 14, 2007 - Software update

  • Amarty S-04A and S-06A:
    cleared the error code P0602 when programming CaTCHER softwares

Apr. 17, 2007 - Software update

  • Smarty S-06A:
    Bug in code P0602 fixed for years 2006 & 2007.

Apr. 12, 2007 - Software update

  • Smarty S-06A - S-04A :
    Error code during update of year 2005.5 fixed. Revised timing in years 2004.5 to 2007. Code P0602 fixed for years 2006 & 2007.

Mar. 26, 2007 - Software update

  • Smarty S-04A:
    new updates available for Dodge 5.9 year 2004 and 2005

Mar. 21, 2007 - Software update

  • Smarty S-06A:
    new updates available for Dodge 5.9 year 2004, 2005, 2006 and 2007

Mar. 3, 2007 - Software update

  • Smarty S-06A:
    Corrected a problem in ABS programming: in a few trucks, programming tire diameter, Smarty showed an error message (CAN error 175).

Feb. 8, 2007 - Software update

  • Smarty S-06A:
    new updates available for Dodge 5.9 year 2007 to correct a problem about a DTC P0602 shown returning Smarty to stock
  • Used the file Archiver 7-Zip to reduce the size of the download files.
    7-Zip is a free of charge, open source file archiver.
    It can be downloaded from the following internet site: http://www.7-zip.org/

Dec. 31, 2006 - Software update

  • Smarty S-06A:
    new updates available for Dodge 5.9 year 2007

Dec. 30, 2006 - Software update

  • Smarty USB:
    Prompted for file name before downloading to Smarty when clicking on "Send"

Dec. 21, 2006 - Software update

  • Smarty S-04A:
    1. For years 2004.5 - 2005.5, softwares with disabled wastegate released
    2. For all years: softwares with dedicated timing for aftermarket injectors released.
    3. For all years: added torque management version # 4 (wild).

Dec. 21, 2006 - Software update

  • Smarty S-06A:
    Smarty S-06A is now capable to work from year 2003 to present.
    1. For years 2004.5 - 2005.5, softwares with disabled wastegate released
    2. For all years: softwares with dedicated timing for aftermaket injectors released.
    3. For all years: added torque management version # 4 (wild).
    4. For year 2006: latest Chrysler "*.ar " softwares implemented.
    5. For year 2007: updates coming soon.

Dec. 6, 2006 - Software update

  • Smarty S-04A and Smarty S-06A:
    1. For years 2003 - 2005.5, added ABS DTC clearing after ECM update.
    2. For all years: implemented new "anti-rattle" timing for non-stock injectors
    3. For all years: added latest Chrysler software releases